57 Material type Elastomeric foam based rubber; manufactured with Armaprence® Patented technology US patent No. 8.163.811, EU patent No. 2 261 305. Factory made flexible elastomeric foam (FEF) according to EN 14304 Colour Blue Material information Self-adhesive coating: pressure-sensitive adhesive coating on modified acrylate basis with mesh structure. Covered with polyethylene foil. The protective backing present on the self-adhesive tubes and sheets may contain traces of silicon. Applications Insulation/protection to control condensation, reduce energy loss and protect against frost on pipes, air ducts, vessels (incl. elbows, fittings, flanges etc) Suitable for hot and cold water services, chilled water lines, heating systems, air conditioning ductwork and refrigerated pipework. Armaflex tape should be used to fully secure seld-adhesive tube seams. Special features Low smoke performance Safety & environment Type III Environmental product Declaration (EPD): Declaration # EPD-ARM-20150109-IBB1-DE, Insitut Bauen und Umwelt e,V. (IBU). Assembly Light-weight and flexible. Closed cell structure means no additional vapour barrier is required. Remarks Declaration Of Performance (DOP) is available in accordance with Article 7(3) of regulation (EU) No 305/2011 www.armacell.com/dop Property Value/Assessment Test Standards & Remarks Temperature Range Max service temperature +110˚C (+85˚C if sheet or tape is glued to a flat object) EU 5846 Tested acc to EN 14706, EN 14707 & EN 14304 Min service temperature -50˚C (For temperatures below -50 ˚C please contact our technical department) Thermal Conductivity Tubes, Sheet & tape λ 0˚C ≤ 0.040 W/(m·K) [40+0.1⋅ ϑm + 0.0009⋅ ϑm 2 ]/1000 EU 5846 Declared acc. to EN ISO 13787 Tested acc. to EN12667 & EN ISO 8497 Water Vapour Diffusion Resistance Tubes & Sheet μ ≥ 7000 EU 5846 Tested acc. to EN 12086 & EN 13469 Fire Performance Tubes, self-adhesive tubes, tape BL -s1.d0 EU 5846 Classified acc. to EN 13501-1 Tested acc. to EN 13823 & EN ISO 11925-2 Sheets , self-adhesive sheet B-s2,d0 Ship building Bureau Veritas, Det Norske Veritas, Lloyds Register D 5243 EU 5954 D 5245 Classified acc. to MED 96/98/EC MODULE D Tested acc. to IMO Resolution Fire resistance od structural element EI 30 - EI 120 EU 5846 EU 5584 Classified acc. to EN 13501-2 Tested acc. to EN 1366-3 Fire Class FM Approved up to 25mm D 5192 Tested acc.to UBC26-3 Class No. 4924 Practicial fire behaviour Self-extinguishing, does not drip & does not spread flames, low smoke density Other technical features Dimensions & tolerances In accordance with EN 14304, table 1 EU 5846 Tested acc. to EN 822, EN 823 & EN 13467 UV resistance For protection against UV radiation use cladding systems such as Okabell for outdoor application Okatherm for indoor aplications. Storage & shelf life Self-adhesive tapes Self-adhesive sheets Self-adhesive tubes 1 year. Can be stored in dry clean rooms at normal relative humidity (50% to 70%) and ambient temperature (0˚C - 35˚C) Antimicrobial behaviour No fungal growth observed Closed cell flexible elastomeric foam, based on a patented synthetic rubber with unique fire reaction properties and minimal smoke emission. Recommended for application in air conditioning and refrigeration installations, as well as for building equipment, industrial installations and high risk areas. TECHNICAL DATA