237 ARMAFLEX SF Cleaner Water-soluble cleaner ARMAFLEX Cleaner Special cleaner for use with all ArmaFlex adhesives Colour Beige Clear Material special info Liquid Liquid Applications Cleaning of surfaces where ArmaFlex is to be installed. Cleaning of surfaces where ArmaFlex is to be installed. Assembly To ensure a perfect adhesion all contaminated sufaces, including ArmaFlex, must be cleaned. To ensure a perfect adhesion all contaminated sufaces, including ArmaFlex, must be cleaned. In addition the cleaner can be used to sufaces where ArmaFinish 99 is being applied. Remarks ArmaFlex SF cleaner to be spayed onto areas that require cleaning and allowed to settle (time depending on the amount of dirt) before washing off. Can also be used to clean tools. Storage & shelf life 12 months sealed in original container. Keep container tightly closed in a cool, well ventilated place. Protect from frost and do not store below +5 ˚C. 12 months sealed in original container. Keep container tightly closed in a cool, well ventilated place. Protect from heat & direct sunlight. Do not store together with explosive substances or spontaneously combusting subtances. Preparation of surfaces Clean surfaces and ArmaFlex surface with ArmaFlex Cleaner. Compatibility with bases: • Very good adhesion to metallic sufaces. • The adhesive‘s compatibility with colour coated sufaces needs to be tested. • Incompatible with asphalt, bitumen and red lead (linseed oil-based) Flash point >100 ˚C approx -20 ˚C Explosion limits Lower: approx 1% Vol, Upper: approx 13 % Vol. Regulation of inflammable liquids. Recycling Dispose of waste according to applicable legislation, for more details see the relevant safety data sheets. Allocation of a waste code number, according to the European Waste Catalouge, should be carried out in agreement with the regional waste disposal company. For details see relevant Safety Data Sheet. Packaging must be emptied of all residues. Cans must be emptied prior to recycling. Cans containing adhesive must be recycled into new product. Transport classes Non hazardous material as defined by the transport regulations. Dependent on the transport sector ARMAFINISH 99 UV resistant paint that remains permanently elastic, resistant to weathering and with good ageing resistance. Colour Black, White (RAL 9001) OR GREY (RAL 7037) Material type Non-drip Material special info Normal consumption: 0.55 Litres per M2 when two coats applied (corresponds to a dry film thickness of 0.26mm) Applications Protection of ArmaFlex insulation materials when installed outdoors and for marking purposes when used indoors. Assembly ArmaFlex insulation (except HT/ArmaFlex & ArmaFlex Ultima, see product data sheets) installed outdoors, should be covered with two coats. Application temperature: +10˚C to +30 ˚C, Drying time: 2 hours (+20 ˚C), Max relative humidity: 80%. It‘s necessary to allow 2 hours between each coat and the second coat must be applied within 7 days. The paint may be applied with a brush or roller and tools cleaned with with water or ArmaFlex cleaner. Remarks Unprotected ArmaFlex must not be exposed to weathering for more than 3 days and ArmaFinish 99 paint should be applied as soon as possible. The protective coating should be inspected at regular intervals. After 2 years at the latest a further two coats should be applied. Storage & shelf life 12 months in unopened container. Once open keep container tightly closed in a cool, well ventilated place and potect from frost. Explosion limits None Recycling Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company. For details see relevant Safety Data Sheet. Cans must be emptied prior to recycling. Cans containing adhesive must be recycled into new product. TECHNICAL DATA