38 Close the seam applying firm pressure & push the pipe support into the middle of the clamp. Tighten the screws & before installing the tube, glue the edges of the pipe support to the pipe. Wet seal the butt joins using the adhesive. Install the insulation either side of the support & fit under slight compression. Install the support around the pipe, seal the surface using adhesive & remove the backing strip. ArmaFix Ecolight to thermally insulate pipe bracket Integrated vapour barrier and self-adhesive seal on both sides of the support to avoid thermal bridges and condensation. Prevents energy losses at joins Manufactured with a PET core for greater load capacity 1 2 3 4 Made using 100% recycled plastic bottles, diverting thousands of tonnes of plastic from landfill. ArmaFix clamps are available to match the ArmaFix Ecolight sizes. CLAMPS RECYCLED PET FOAM By installing ArmaFix Ecolight pipe supports, direct contact between the pipe bracket and pipework is avoided. This eliminates cold spots and prevents condensation from forming on chilled water and refrigeration lines. By helping to control condensation, the risk of corrosion and secondary damage to surrounding goods and equipment can be prevented PROPERTIES INSTALLATION GUIDE