46 Close the seam applying firm pres- sure & push the pipe support into the middle of the clamp. Tighten the screws & before installing the tube, glue the edges of the pipe support to the pipe. Wet seal the butt joins using the adhesive. Install the insulation either side of the support & fit under slight compression. Install the supoport around the pipe, seal the surface using self-adhesive tape. ArmaFix AF thermally insulates the pipe Integrated vapour barrier and self-adhesive seal on both sides of the support. Avoids thermal bridges and condensation to ensure there is no loss of energy at pipe joins ArmaFix AF pipe supports are manufactured with a PET core that provides greater load capacity Install together with AF/ArmaFlex Class O tube ArmaFix AF pipe supports are available in convenient combi- packs which include the brackets and their corresponding clamps. The ArmaFix AF pipe supports are designed to thermally insulate joins on duct installations. DUCT SUPPORTS COMBI-PACK PROPERTIES 1 2 3 4 INSTALLATION GUIDE